ATTENTION !!! Shipment: 25-28 January 2018
- Hash Rate14TH/s. Variation of ±5% is expected
- Power Consumption1372W (14TH/s batch) (at the wall, with Bitmain’s APW3 PSU,93% efficiency, 25°C ambient temp). Expected discrepancy of +10%
- Power Efficiency0.098 J/GH +10% at the wall (with Bitmain’s APW3 PSU, 93% efficiency, 25°C ambient temp)
- Rated Voltage11.60 ~13.00V
- Chip quantity per unit189x BM1387
- Dimensions350mm(L) x 135mm(W) x 158mm(H)
- Cooling2x 12038 fans; Front fan: 6000rpm, Rear fan: 4300rpm
- Operating Temperature0°C to 40°C
- Network ConnectionEthernet
- FrequencyAutomatically set
2. Please select the correct address for shipping before you submit your order because, for this batch, the shipping address cannot be changed after the order has been submitted.
3. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.
4.The shipping for this batch will start on a first-order-first-ship basis on 21-31 January 2018 for orders that Bitmain has received full payment for. We advise you to research and prepare in advance for the customs' clearance in your country to avoid delays or unexpected costs.
5. You will need an ATX PSU. Bitmain recommends the APW3++ for the S9 miners. It cannot power more than one miner.
6. There are 3 PCI-e connectors for +12V DC input on each hashing board and all 3 need to be connected to the PSU for the hashboard to operate. Do not connect more than one PSU to the same hashing board!
7. Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the 10x PCIE connectors are connected to power supply.